XINFU-Fujian-China
Instructions for Use of Motorcycle Battery
Release time: 2014-04-08
The starting of new battery includes adding electrolyte, charging and installation, which are generally completed by the service personnel of the authorized repair shop. The user can first check the appearance of the battery, such as whether there are scars and cracks on the shell, and whether the terminal is inclined or deformed. Be careful not to bend, block or flatten the vent pipe of the battery during use.
The daily use and maintenance of battery mainly include the following points:
Press the button for no more than 5 seconds each time. If it cannot be started for several consecutive times, check the oil supply system and the starting and ignition systems.
The following conditions will cause over discharge or insufficient charge of the battery and shorten the service life of the battery. Frequent starting and short driving distance. Drive at low speed for a long time. Hold the brake handle or step down the rear brake pedal to keep the brake light on. Install additional electrical accessories or replace with high-power bulbs.
If it is difficult to start, the light is dim, and the horn does not sound loud, power should be replenished immediately.
Check the liquid level every 1-3 months. If the liquid level is lower than the LOWER LEVEL, add distilled water to the high liquid level. After adding water, it is better to make up electricity. Except for maintenance free batteries.
If the motorcycle is not used for a long time, please recharge it before stopping use, remove it for storage and recharge it once a month.
Keywords:
Online Message